- Model : DV10
- Dimension : 8″ (H) x 10.2″ (L) x 3″ (W)
- Weight : 1.6 kg
- Input Voltage : 180V-280V (1 phase) & 350V-450V (3 phase)
- LCD Display: display the individual phase voltage and current
- Power consumption : 10W
- Network Support : Quad Band GSM 850/900/1800/1900 – All mobile operators
- Connectors : Plug-n-play connectors
- Wiring kit : 0.5sq.mm 9 core cable
- Enclosure : Metallic
- Antenna : High Gain external antenna (3m)
- Certification : ETDC
- Agriculture – Irrigation
- Factories & Industries
- Drip Irrigation Valve Controller DV10-1 No
- External antenna with 10 feet cable – 1 No
- 9 Core flexible wiring kit 1metre – 1 No
- Battery-1 Nos
- 100mA 3cm Fuse -6 Nos
- CT coil -1 Nos
- Valve connector-2 Nos
- User manual with wiring diagram
In built Single phase preventer
This controller protects the pumpset from phase failure, low voltage and phase imbalance. It will not allow the pumpset to run if above said problem occurred. Also, it will send confirmation SMS to you.
Dry run preventer
MS1 model “Cell phone motor starter controller” protects pumpset from dry run. You can set the minimum cut off amps value to switch off the pumpset. Controller switches off the pumpset once the water dries.
Auto on mode
It switches on the pumpset automatically after electricity resumes.(Note: You can set the delay time through SMS) It send’s acknowledgement SMS after pumpset on.
Unbalanced voltage cut off
MS1 model cell phone motor starter controller doesn’t allow the pumpset to run if there is low voltage, phase imbalance or phase failure.
Phase reversal protector
It protects the pumpset from phase reversal. Some times R, Y, B electricity gets reversed. In that case flow of water will be very less. To avoid such situation it doesn’t allow the pumpset to run.
MS1 model cell phone motor starter controller have inbuilt timer mode. You can set the pumpset default on and off time through SMS. It has two type of inbuilt timer.
Over load protector
It protects the pumpset from overload, some times pumpset may stuck up in mud. At that time current(amps) shoots up. To avoid coil burnt it switches off pumpset and protects it.
Inbuilt battery backup
Inbuilt battery backup helps you to get confirmation SMS once electricity fails.
An android application shows the log report in graphical format. It shows the “electricity available hours” and “Pumpset run hours”